What should I pay attention to before starting a ready-mix batching plant?

Notice: Undefined index: host in /home/wwwroot/php7.3/domain/eanmix/web/dm-content/themes/hi-domai/functions.php on line 278

1. Check whether all the switches on the electrical console are in the normal position;

2. See whether the belts of the batching machine and belt conveyor are normal;

3. Check whether the travel switch and proximity switch of the overhaul door and discharge door of the compulsory mixer are normal;

4. See whether the grease in the centralized lubricating oil cylinder of the concrete mixer is sufficient;

5. Check whether the lubricating oil of other operating parts of the mixing plant is sufficient;

6. See whether the connecting bolts of each connecting part are tight;

7. Check whether the manual butterfly valve of the powder tank is open;

8. See whether the gas, water, and admixture pipelines are normal;

9. Check whether the aggregate, powder, water, and additives are sufficient;

10. Before operating the ready mix concrete batching plant, check whether the switches are all closed in the strong electric cabinet;

11. Turn on the power knob of the console, the power indicator should be on at this time, press the air compressor start button on the cabinet door, and check whether the air pressure is above 0.4MP;

Turn on the power of the computer, start the computer and run the monitoring program, according to the set formula ratio, ready to start concrete production.